UL Compliance   PENDING 

(Applies to Enginuity Automation Controller)    

Enginuity controller kits are UL approved for US and Canadian residential installation.  Prior to 
installation, please review the AC input requirements for your locale.   


UL US (English)

UL conformity requires the following in respect to the input AC power and the Enginuity™ controller system:

  1. A 120VAC receptacle shall be positioned within 6ft(1.83m) of the intended Enginuity™ installation location.
  2. The supplied AC power cord shall be routed in such a manner as to prevent it to becoming entangled in the
    window/door, moving parts of the system, or the operator.
  3. The AC power cord shall not be routed through doorways, windows openings, walls, ceilings, floors, or the like.
  4. The AC power cord shall not be secured to the building structure nor concealed behind walls, and the like.
  5. If the input AC power cord is replaced, it must meet or exceed the supplied power cord’s ratings shown:
                                           18AWG(0.824mm), 300V, 2/C, 60ºC, Length: 6ft(1.83m)
                                                              UL Listed for the US and Canada.
UL Canada (French)

UL Conformité

La conformité UL exige ce qui suit en ce qui concerne la puissance AC d'entrée et le système de commande Enginuity™:

  1. Un récipient de 120VAC doit être placé à moins de 6pi(1,83 m) de l'emplacement prévu pour l'installation Enginuity™.
  2. Le cordon d'alimentation fourni doivent être disposées de manière à l'empêcher de s'emmêler dans la fenêtre/porte, les pièces mobiles du système, ou de l'exploitant.
  3. Le cordon D'alimentation ca ne doit pas être acheminé par des portes, des ouvertures de fenêtres, des murs, des plafonds, des planchers ou autres.
  4. Le cordon d'alimentation ne doit pas être fixé à la structure du bâtiment, ni dissimulé derrière des murs, et la comme.
  5. Si l'entrée cordon d'alimentation est remplacé, il doit satisfaire ou dépasser le cordon d'alimentation fourni est nominales indiquées 
                                             18AWG(0.824 mm), 300V, 2/C, 60ºC, Longueur: 6ft(1.83 m)
 UL listée pour les États-Unis et le Canada

Supplier's Declaration of Conformity

Unique Identifier: 28J0110xxxxxxxx Enginuity™ Controller System
Responsible Party – U.S. Contact Information:

Caldwell Manufacturing Company North America, LLC.
2605 Manitou Rd
Rochester, NY 14692
cservice@caldwellmfgco.com

FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and 

(2) this device must accept any interference received, including interference that may cause undesired operation.